Product Description
Buyers Products Part Number 14710F381211 (Has Replaced 1400465SSE)
SaltDogg 10ftx38in Gas Chain 304 Stainless Steel Spreader
Key Specifications:
-
Designed for dump bodies and flatbeds with a minimum 13,000lb GVW (depending on model).
-
High quality, 304 stainless steel construction for optimum corrosion resistance.
-
Powered by a 10-1/2 HP Briggs and Stratton Intek industrial/commercial engine with an included battery for electric start.
-
Spreads bulk salt, bulk sand, or a 50/50 salt/sand mix.
-
In-cab controls with independent variable speeds for the conveyor and spinner.
-
18 in. poly spinner broadcasts up to 30 ft.
-
Versatile 14-1/2 in. chain conveyor drive with 1/4 in. crossbars.
-
Stainless steel inverted V reduces stress on the drive line and improves flow.
-
Four hinged top screen with 1/4 in. bars included.
Buyers Products SaltDogg 2.5-5.5 Cubic Yard Hydraulic Conveyor Chain Spreader gives contractors and municipalities a heavy duty, durable spreader powered by 10-1/2 HP Briggs and Stratton Intek Industrial/Commercial gas engine, with in-cab electric start throttle control. The spreader combines the power of a gas engine with modern spreader conveniences. It works with bulk salt, bulk sand, or a 50/50 salt/sand mix. The hoppers are designed for dump bodies and flatbeds with a minimum 13,000 lb GVW (gross vehicle weight) chassis; depending on size of spreader.
The highly corrosion-resistant 304 stainless steel hopper features a fully-welded frame. It comes equipped with two hinged top screens with 1/4 in bars. The 14-1/2 in. wide, high-flow, steel pintle chain conveyor has 1/4 in. crossbars and a stainless steel floor. The high-torque conveyor gearbox has a 20:1 ratio with a 1 in. input shaft and 1-1/8 in. output shaft on tapered roller bearings to provide extra power on startup. A SaltDogg Spreader is built to last. A stainless steel inverted V reduces stress on the drive line to improve material flow. An adjustable feedgate with lock pin offers additional material flow control.
The spreader comes equipped with a 12V electric clutch and in-cab, three position momentary switch and throttle. An 18 in. poly spinner casts material 2 ft to 30 ft. The spreader is available with a regular or extended chute. Two adjustable baffles allow you to cater the spread pattern to your use. The chute and spinner assembly flips up or detaches completely, tool-free, for convenient bulk unload, easy servicing, and access to towing. Spreader is shown with optional light bar (8891144) and pre-wet system (LS1) which are sold separately.
Product Common Use: Salt Spreaders, Municipal Spreaders, Road and Highway Maintenance
Other Specifications:
-
Chute Primary Material: 304 Stainless Steel
-
Chute: Adjustable Height
-
Controller Type: In-Cab Throttle/Choke
-
Drive Type: Gas
-
Hopper Length: 120.00 "
-
Hopper Material: 304 Stainless Steel
-
Number Of Motors: 1
-
Spinner Material: Polyurethane
-
Works With Bagged #1 Rock Salt: Yes
-
Works With Bulk Salt: Yes
-
Works With Bulk Sand: Yes
-
Works With Salt / Sand Mix: Yes
-
Capacity: 3.20 yd³
-
Overall Height: 38.00 "
-
Overall Length: 140.00 "
-
Overall Width (At Top): 58.00 "
-
Hopper Width: 58.00 "
-
Top Screen: Yes
-
Vibrator Included: No
-
Spinner Diameter: 18.00 "
-
Spreading Width Range: 2 To 40 '
-
Feed Mechanism: Conveyor Chain
-
Feed Mechanism 2: 14 1/2 in. Pintle Chain with 1/4in. Bars
Made in the USA
Manufacturer non-prorated warranty: 24 months
Free shipping to the Continental 48 States.
Contact Paris Supply, LLC. at 859-567-0130 for residential shipping quotes or shipping quotes to Canada, Alaska, Hawaii, Puerto Rico & Guam.
...God gathers His children in His arms and carries them close to His heart... Isaiah 40:11 PST