Buyers Products Part Number 1400200SS
SaltDogg 1.5cu yd Gas Stainless Steel Hopper Spreader
- Designed for 3/4 ton and 1 ton trucks.
- Available with a 72 in. hopper with a 1.5 cubic yard capacity.
- 10-1/2 HP gas engine with convenient electric start and throttle control.
- Spreads bulk salt or a 50/50 salt/sand mix.
- In-cab controls with independent variable speeds for the conveyor and spinner.
- 12 in. poly spinner broadcasts up to 30 ft, using a regular or extended chute.
- Versatile 12 in. chain conveyor drive.
- High quality, 304 stainless steel construction for optimum corrosion resistance.
- Stainless steel inverted V improves flow and reduces stress on the drive line.
- Top screen included.
- Optional extended chute available.
Buyers Products SaltDogg 1.5 Cubic Yard Gas Stainless Hopper Spreader gives contractors and businesses a gas-powered spreader ready for commercial applications. It works with bulk salt, bulk sand, or a 50/50 salt/sand mix. The 6 ft hopper fits the beds of 3/4 ton and up trucks. With electric start and in-cab throttle control, the spreader combines the power of a gas engine with modern spreader conveniences. The spreader comes equipped with a 12V electric clutch and in-cab, 3 position momentary switch and throttle.
The spreader is powered by a 10-1/2 HP Briggs and Stratton Intek industrial/commercial engine with a battery for electric start. A heavy duty drive shaft and 1-1/8 in. sealed bearings are designed for long life. The high-torque conveyor gearbox has a 20:1 ratio with a 1 in. input shaft and 1-1/8 in. output shaft on tapered roller bearings to provide extra power on start up.
The hopper and fully welded frame are made from high quality 304 stainless steel for long lasting corrosion protection. The hopper also comes outfitted with a top screen. The spreader's steel pintle chain conveyor features a stainless steel inverted V design to reduce stress on the drive line and improve flow. The high-flow pintle chain conveyor is 12 in. wide and has a stainless steel floor. An adjustable feedgate with friction lock offers additional material flow control. A 12 in. poly spinner casts material 2 ft to 30 ft. The spreader is available with a regular or extended chute. Adjustable baffles allow you to adjust the spread pattern to match your use. The SaltDogg 1.5 Cubic Yard Gas Stainless Hopper Spreader is comparable to Swenson® PV and Henderson® FSP.
Product Common Use: Residential Spreading, Light Commercial, Driveways, Parking Lots
- Chute Primary Material: 304 Stainless Steel
- Chute: Standard
- Controller Type: In-Cab Throttle/Choke
- Discharge Position: Center
- Drive Type: Gas
- Hopper Length: 72.00 "
- Hopper Material: 304 Stainless Steel
- Number Of Motors: 1
- Spinner Material: Polyurethane
- Works With Bagged #1 Rock Salt: Yes
- Works With Bulk Salt: Yes
- Works With Bulk Sand: Yes
- Works With Salt / Sand Mix: Yes
- Capacity: 1.50 yd³
- Overall Height: 32.10 "
- Overall Length: 91.70 "
- Overall Width (At Top): 47.00 "
- Hopper Width: 47.00 "
- Top Screen: Yes
- Drive Motor Horse Power: 10.50 HP
- Vibrator Included: No
- Spinner Diameter: 12.00 "
- Spreading Width Range: 2 To 30 '
- Gearbox Ratio: 20:1
- System Voltage: 12 vdc
- Feed Mechanism: Conveyor Chain
- Feed Mechanism 2: 12 in. Pintle Chain Conveyor
Made in the USA
Manufacturer non-prorated warranty: 24 months
There is a $50.00 charge for Pick Up at Buyers Product with a week lead time.
Free shipping to the Continental 48 States.
Contact Paris Supply, LLC. at 859-567-0130 for residential shipping quotes or shipping quotes to Canada, Alaska, Hawaii, Puerto Rico & Guam. Also, contact us if your item is damaged in shipping or is defective and we will take care of getting you a new replacement.
"I Am that I Am." Exodus 3:14 KJV
...God gathers His children in His arms and carries them close to His heart... Isaiah 40:11 PST