BUYERS SALT DOGG ELECTRIC Municipal Commercial Spreader 1400460SSE 2.75 cuyd NEW

(No reviews yet) Write a Review
Buyers 1400460SSE
Usually ships in 24 hours!

Buyers Salt Dogg

Municipal Commercial STAINLESS STEEL ELECTRIC Salt Spreader

Model# 1400460SSE

108 in. hoppers with a capacity of 2.75 cubic yards

38"H X 58"W X 128.5"L

for trucks (with minimum 13,000 lbs. GVW)

BRAND NEW (Still in the Factory Box!)--

    • Designed for dump bodies and flatbeds with a minimum 13,000 lb GVW (gross vehicle weight).
    • 108 in. hoppers with a capacity of 2.75 cubic yards.
    • Powered by two independent electric motors for conveyor and spinner.
    • Spreads bulk salt, bulk sand, or a salt/sand mix.
    • Versatile 14-1/2 in. chain conveyor drive with 1/4 in. crossbars
    • 18 in. poly spinner broadcasts up to 30 ft, using a regular or extended chute.
    • Two chute baffles allow you to adjust the spread pattern to your application.
    • In-cab controls with independent variable speeds for the conveyor and spinner.
    • High quality, 304 stainless steel construction for optimum corrosion resistance.
    • Stainless steel inverted V improves flow and reduces stress on the drive line.
    • Two hinged top screens with 1/4 in. bars included.
    • Made in the USA.

The SaltDogg 2.5-3 Cubic Yard Electric Conveyor Chain Spreader series gives contractors and municipalities a heavy duty electric spreader ready for commercial use. The 96 in., 108 in., or 120 in. hoppers are designed for dump bodies and flatbeds with a minimum 13,000 lb GVW (gross vehicle weight) chassis. The spreader strikes a balance between the convenience and value of an electric spreader and the robust volume traditionally found in gas and hydraulic spreaders.

The spinner is powered by a 1/2 HP, 12V motor, and the conveyor chain is powered by a 3/4 HP, 12V motor.The spreader is controlled by a heavy duty, in-cab controller with independent variable speeds for the conveyor and spinner. It also comes outfitted with four hinged-top screens with 1/4 in. bars. 

A SaltDogg stainless spreader is an investment made to last. Its hopper and fully welded frame are made from high quality 304 stainless steel for long lasting corrosion protection. The hopper also comes outfitted with a top screen. The spreader is equipped with a steel pintle chain conveyor and features a stainless steel inverted V to reduce stress on the drive line and improve flow. The high-flow conveyor is 14-1/2 in. wide with 1/4 in. crossbars, and has a stainless steel floor. An adjustable feedgate with lock pin offers additional material flow control. 

A 18 in. poly spinner casts material 2 to 30 ft. The spreader is available with a regular or extended chute. Two adjustable baffles allow you to cater the spread pattern to your use. The chute and spinner assembly flips up or detaches completely, tool-free, for convenient bulk unload, easy servicing, and access to towing.


Product Common Use: Snow and Ice Control, Road and Lot Maintenance


Truck Shipped ( Commercial Address from $250.00 up - Call Dennis at 859-707-7210 for quote!)

Local Pickup in Mentor Ohio ( free)


Manufacturer non-prorated warranty: 24 months

Only ships to the Continental 48 States & Canada!

Contact Dennis for a Shipping Quote!

Buyers Products Company warrants all parts of the product to be free from defects in material and workmanship for a period of one (1) year. All SHPE Poly Spreaders are warranted for two (2) years. Parts must be properly installed and used under normal conditions. Normal wear is excluded. Any part, which has been altered, including modifications, misuse, accident, or lack of maintenance will not be considered under this warranty. The sole responsibility of Buyers Products Company under this warranty is limited to repairing or replacing any part(s), which are returned, prepaid, 30 days after such defect is discovered, and returned part(s) are found to be defective by Buyers Products Company. Authorization from Buyers Products Company must be obtained before returning any part. The following information must accompany defective parts returned to Buyers Products Company: RMA #, spreader model, serial number, date installed, and distributor from whom purchased. Buyers Products Company shall not be liable for damage arising out of failure of any unit to operate properly, or failure, or delay in work, or for any consequential damages. No charges for transportation or labor performed on any part will be allowed under this warranty.

Videos Hide Videos Show Videos

Customer Review: Dennis, I just want to thank you for the fast, professional service. This was my third purchase from ParisSupply.Com and it sure won't be my last. The tarp systems work great and my drivers thank you. I'm really pleased with the quality of the materials and the price of the systems. Tony Setzer PC Mulch