BUYERS SALT DOGG SHPE6000 Electric Poly Commercial Spreader

$8,477.77
(No reviews yet) Write a Review
SKU:
Buyers SHPE6000
UPC:
7.2492E+11
Condition:
New
Availability:
Usually ships in 24 hours!
BUYERS SALT DOGG SHPE6000 Electric Poly Commercial Spreader

Buyers Salt Dogg

Commercial Pickup Salt Spreader, Model# SHPE6000

for trucks (Min. 25,999 lbs. GVW of 25,999)

 

This customer bought 3 of the SHPE6000s MAY 29, 2015:  Very good to deal with. It just don't get any better.

 

The SHPE6000 series SaltDogg® spreaders are completely self-contained, ultra–durable spreader units designed for ice and snow control. The rugged design allows for use with salt or salt/sand mix. The complete assembly mounts easily on utility vehicles, pickups, dump, platform and utility trucks, making it ideal for municipalities, shopping malls, industries, hospitals and private contractors.

Features and Options

 
Material Hopper – Rotationally molded double-wall polymer unibody spreader with smooth angled walls to maximize material flow. No drilling required.

Auger –6" dia. screw-type auger system travels the length of the hopper floor, providing maximum material flow at a continuous rate. An independent spinner/auger controller allows for both independent spinner speed and an infinitely adjustable ratio between spinner and auger.

Material Flow/Output – Salt, 2.2 cu. ft./minute; Salt/Sand, 1.3 cu. ft./minute. Spread width is variable from 5 to 38 feet.

Spinner Chute Assembly – A 14" polymer disc is connected to a 3/4" diameter shaft. The spreading material is guided from the stainless steel trough to the spinner plate through an enclosed heavy-duty polymer chute and spinner assembly with an external deflector. The extra-wide adjustable deflector protects the vehicle and allows for complete directional spread control and full or compact spread. Total spread path ranges from 5' to 30'. A convenient spring-latch locking mechanism allows the spinner assembly to be removed for cleaning/storage.

Electric Motors – Two ultra-quiet 12-volt DC direct-drive motors power the auger and spinner, and are encased in a heavy-duty poly housing along with two independently powered vibrators. The wiring harness is constructed of 10-gauge automotive wire with non-combustible sheathing (-50°C to -105°C). An in-cab console features independent controls for the auger, spinner and vibrator.

Standard Equipment – 1/4" black powder coated steel top screens (2). Heavy-duty 12 VDC vibrator, rated at 900 of force pounds for maximum performance. Spreader hold-down kit.

Spread Material: bulk salt, salt & sand mix
Feed Mechanism: 5-1/2" carbon steel auger, stainless steel trough
Power Source: electric
• Capacity: 6.0 cu. yds. (10' 7")
• Poly-molded hopper with stainless steel frame
• Material spread up to 30'
• Two 12 VDC direct drive motors (3/4 HP for auger, 1/2 HP for spinner).
• 5-1/2" carbon steel auger, stainless steel trough
• Weighs 1,000 lbs. less compared to steel/stainless steel
• Spinner assembly can be easily removed for cleaning and storage
• Includes two top screens, stainless steel inverted V, 12 VDC 900 lb. vibrator
• Optional tarp kit (3021928) available
          

 

 

Capacity

6 cu. yds.

Chute

Standard

Construction

Polyethylene

Controller

120A High Power | Variable Auger Speed | Variable Spinner Speed | Vibrator Switch | Utility Light Output

Cover

N/A

Feed Mechanism

6" Carbon Steel Auger, Stainless Steel Trough

Hopper Dimensions

127" x 77" x 57"

Hopper Length

127"

Hopper Width

77"

Ideal Use

Medium & Heavy-Duty Commercial

Model

SHPE6000

Overall Height

57"

Overall Width

77"

Power Source

(2) 12V DC direct drive

Spinner

14" Poly

Spreading Material

Bulk Salt; 50/50 Salt/Sand mix

Spreading Width

5'-40'

Top Screen

YES

Vehicle Application

Minimum GVW of 25,999 lbs.

Vibrator

YES

 

Truck Shipped ( Commercial Address from $140.00 up - Call Dennis at 859-707-7210 for quote!)
Local Pickup in Mentor Ohio ( free)

MADE IN THE U.S.A.

Manufacturer non-prorated warranty: 12 months

 Only ships to the Continental 48 States & Canada!

Contact Dennis (859 707 7210) for a Shipping Quote!

If your item is damaged in shipping or is defective, I AM Sellin will take care of getting you a new replacement sent right out to you!!!

 

"I AM THAT I AM"Exodus 3:14

...God gathers His children in His arms and carries them close to His heart... Isaiah 40:11PST


UNLESS YOU ARE IN KENTUCKY, THERE IS NO SALES TAX ON THIS SPREADER!


1 YEAR FACTORY WARRANTY - Warranty Coverage: Buyers Products Company warrants all parts of the product to be free from defects in material and workmanship for a period of one (1) year. All SHPE Poly Spreaders are warranted for two (2) years. Parts must be properly installed and used under normal conditions. Normal wear is excluded. Any part, which has been altered, including modifications, misuse, accident, or lack of maintenance will not be considered under this warranty. The sole responsibility of Buyers Products Company under this warranty is limited to repairing or replacing any part(s), which are returned, prepaid, 30 days after such defect is discovered, and returned part(s) are found to be defective by Buyers Products Company. Authorization from Buyers Products Company must be obtained before returning any part. The following information must accompany defective parts returned to Buyers Products Company: RMA #, spreader model, serial number, date installed, and distributor from whom purchased. Buyers Products Company shall not be liable for damage arising out of failure of any unit to operate properly, or failure, or delay in work, or for any consequential damages. No charges for transportation or labor performed on any part will be allowed under this warranty.

Videos Hide Videos Show Videos

Customer Review: Dennis, I just want to thank you for the fast, professional service. This was my third purchase from ParisSupply.Com and it sure won't be my last. The tarp systems work great and my drivers thank you. I'm really pleased with the quality of the materials and the price of the systems. Tony Setzer PC Mulch