BUYERS SALT DOGG SHPE1500 RED Electric Poly Spreader

$3,297.77
(No reviews yet) Write a Review
SKU:
Buyers SHPE1500 RED
Condition:
New
Availability:
Usually ships in 24 hours!
BUYERS SALT DOGG SHPE1500  RED Electric Poly Spreader

Buyers Salt Dogg

 

Commercial Pickup Salt Spreader, Model# SHPE1500 RED

THIS LISTING IS FOR THE RED SHPE1500

 

 

IDEAL FOR MEDIUM AND HEAVY DUTY COMMERCIAL APPLICATIONS.
General –The SHPE series electric polymer Salt Dogg spreaders are completely self-contained, ultra-durable spreader units designed for ice and snow control. The rugged design allows for use with salt or salt/sand mix. The complete assembly mounts easily on pickup, dump and platform trucks, making it ideal for municipalities, shopping malls, industries, hospitals and private contractors.

MATERIAL HOPPER – Rotationally molded double-wall polymer unibody spreader with smooth angled walls to maximize material flow. Features integrated positive position mount system plus 4-piece ratchet tie-down kit. No drilling required. Molded fork slots in hopper (1500 series only) makes for easy one man installation and removal; requires extended forks, or lift either series with 4-point tie downs.

AUGER – Screw-type auger system travels the length of the hopper floor, providing maximum material flow at a continuous rate. An independent spinner/auger controller allows for both independent spinner speed and an infinitely adjustable ratio between spinner and auger.

MATERIAL FLOW/OUTPUT – Salt, 2.2 cu. ft. / minute; Salt-Sand, 1.3 cu. ft. / minute. Spread width is variable from 5 to 38 feet.

SPINNER CHUTE ASSEMBLY – An 11.5" polymer disc with four fins is connected to a 3/4" diameter shaft. The spreading material is guided from the stainless steel trough to the spinner plate through an enclosed heavy-duty poly chute and spinner assembly with an external deflector. The extra-wide adjustable deflector protects the rear and under carriage of the vehicle, and allows for complete directional spread control and full or compact spread. Total spread path ranges from 5' to 38'. A convenient spring-latch locking mechanism allows the spinner assembly to be easily removed for cleaning/storage.

ELECTRIC MOTORS – Two ultra-quiet 12-volt DC direct-drive motors power the auger and spinner, and are encased in a heavy-duty poly housing along with the independently powered vibrator. The wiring harness is constructed of 10-gauge automotive wire with non-combustible sheathing (-50° to -105° C). An in-cab console features independent controls for the auger, spinner and vibrator.

STANDARD EQUIPMENT – 1/4" black powder coated steel top screen. Heavy-duty poly-vinyl tarp with reinforced corners and tie-down kit. Heavy-duty 12 VDC vibrator, rated at 210 foot pounds for maximum performance. Spreader hold-down kit.

SHPE1500 & SHPE1500X: Overall Length, 92" (requires 77" minimum bed length. Fits all 8' beds and most standard 6' beds); Capacity Struck, 1.45 cu. yd.; Width, 50.5"; Height, 37.5"; Recommended use, 3/4 or 1-Ton trucks.
 
Spread Material: bulk salt, salt & sand mix
Feed Mechanism: 2-1/2" stainless steel auger and trough
Power Source: electric
• Capacity: 1.5 cu. yds.
• Double-wall poly-molded hopper
• Material spread up to 30'
• Two 12 VDC direct drive gear motors (1/2 HP for auger, 1/4 HP for spinner)
• 2-1/2" diameter stainless steel auger and trough
• Spinner assembly can be easily removed for cleaning and storage
• Includes 200 lb. vibrator, top screen, tarp, tie-downs, remote auger bearing grease kit
SHPE1500
 

Capacity

1.5 cu. yds.

Chute

Standard

Construction

Polyethylene, Black, Red, Yellow

Controller

Variable Speed

Cover

HD Poly-Vinyl Tarp

Feed Mechanism

2.5" Stainless Steel Auger & Trough

Hopper Dimensions

87.5" x 51" x 38"

Hopper Length

87.3"

Hopper Width

50.5"

Ideal Use

Medium & Heavy-Duty Commercial

Model

SHPE1500

Overall Height

38"

Overall Width

50.5"

Power Source

(2) 12V DC direct drive

Spinner

14"

Spreading Material

Bulk Salt; 50/50 Salt/Sand mix

Spreading Width

5-30 ft.

Top Screen

1/4" Black Powder Coated Steel

Vehicle Application

3/4-Ton & 1-Ton Trucks

Vibrator

Standard (200 force lbs

 
Truck Shipped ( Commercial Address from $120.00 up - Call Dennis at 859-707-7210 for quote!)
Local Pickup in Mentor Ohio ( free)

MADE IN THE U.S.A.

Manufacturer non-prorated warranty: 12 months

Only ships to the Continental 48 States & Canada!

If your item is damaged in shipping or is defective, I AM Sellin will take care of getting you a new replacement sent right out to you!!!

 

"I AM THAT I AM"Exodus 3:14

...God gathers His children in His arms and carries them close to His heart... Isaiah 40:11PST


UNLESS YOU ARE IN KENTUCKY, THERE IS NO SALES TAX ON THIS SPREADER!

1 YEAR FACTORY WARRANTY

Videos Hide Videos Show Videos

Customer Review: Dennis, I just want to thank you for the fast, professional service. This was my third purchase from ParisSupply.Com and it sure won't be my last. The tarp systems work great and my drivers thank you. I'm really pleased with the quality of the materials and the price of the systems. Tony Setzer PC Mulch